How to maintain cone crusher?
A. the materials must be in the middle of the distributor, see diagram 14. it is not allowed to put the materials into the crushing chamber directly, because it will make the crusher overloaded and the liner plate will be abraded unevenly. Correct feeding conditions:
a. the materials are distributed equally to the crushing chamber.
b. The quantity of materials should not higher than the mortar.
B. the max feeding size should not equal to the feed opening, (the max feeding size=85% of the feed opening) otherwise, it will lead to:
a. the capacity is low
b. some spare parts will be damaged.
C. crusher is not allowed to start in overload condition in case of accident.
D. when stop the crusher, stop the feeder first. After the materials are all discharged out, stop the crusher.
E. the locking system and hydraulic station should be checked often to avoid problems.