Crusher Kownledge

Gyradisc Crusher operating-cost-per-ton of sand includes liners, maintenance and power draw. The liner cost is related to the abrasive characteristics of the material being crushed and the surface moisture. Average liner costs are between $.03 and $.06 per ton of sand. Proper maintenance, excluding liners, will result in costs not exceeding $.01 per ton. Power consumption will be in the area of 3 kwh per ton of sand. The following charts show typical sand circuit gradations for limestone, gravel, and granite.

Mining in one form or another has existed since ancient times. The modern industry has evolved by incorporating gradual improve­ments into common practice. Mining in the United States can be classified in several ways. The classification used in this chapter recognizes four segments: 

More...

how to measure material hardness and choice right crusher?

1. Moh’s hardness
It is a standard to measure material or mineral ore hardness proposed by Germany mineralogist Mohs. He uses pyramid shape diamond needle to carve on the surface of mineral ore, which is called scarification. The carved depth is used to measure the ore hardness. Moh’s unit is level such as f=2 means the hardness of ore is level 2. The Moh’s hardness is not the absolute ore harness value but a number represent ore harness according to harness order. 

More...

Quarried crushed stone is a basic nonmetallic commodity that, The material indeed qualifies as a low-cost material.

A portion of total crushed stone production is crushed stone screenings. Crushed stone screenings are the finer fraction of stone products and normally contain particles that are 4-5 mm (0.15-0.19 in) in size and smaller. The particle size distribution, particle shape, and other physical properties may be somewhat different from one geographical location to another and depend primarily on the type of rock quarried, the equipment used for stone crushing, the ratio of reduction, and the method used for separation of the screenings from the coarse particles.

More...

More...

 Reliable level monitoring with failsafe high level and low level switches on Foundation Fieldbus communications for monitoring crusher “rockbox”

More...

a) Emission Measurement Methods 

For particulate matter and visible emission measurements from stacks attached to dry type control systems like bag filter, the USEPA requires use of methods 5 and 9 for the measurement of process source emission. No established procedures are available for quantifying or assigning visibility readings to emissions from fugitive dust sources. Sampling costs of a stack test requiring a minimum of 3 particulate samples is generally in the range of about Rs.1.5 to 2.5 lakh per set of measurement. 

More...

An ore is a type of rock that contains minerals with important elements including metals . As We all know, there are numerous ores including metal ores and non-metallic minerals. For example iron ore, copper ore, chrome ore, molybdenum ore, bauxite ore, platinum ore, zinc ore, cobalt ore, silver ore, gold ore, nickel ore, titanium ore, tungsten ore, tin ore, uranium ore, etc.

More...

VSI Crusher security safeguard

Firstly, VSI Crusher should be stopped periodically in order to lengthen its service life; Check inner machine wear and tear situation with timely repair and replace, especially the easy wear parts.

More...

Calcium carbonate is an important inorganic salt with wide application as well as main components of Calcareous Rocks (limestone) and calcite. According to different method of manufacturing, Calcium carbonate can be divided into heavy calcium carbonate, light calcium carbonate, colloid calcium carbonate and crystal calcium carbonate.

More...